Release 4.5.6 is live!
brainCloud 4.5.6 is a very focused release – but much more significant than the version number would imply.
This update brings the release of our new Version 2 Relay Servers – which are more reliable, more feature-rich, and faster to launch than our original Relay Servers.
Important: The RelayComms V2 Protocol (used by brainCloud 4.5.6 and newer libs) is not compatible with the RelayComms V1 Protocol (used by brainCloud 4.5.5 and older libs). The recommended migration process is described later in this document.
Improved Relay Servers
As more and more apps use brainCloud’s Relay Servers, we have realized some limitations with our initial implementation:
- Defect – reliable acknowledgments don’t consider all combinations of channel * reliable bit * ordered bit * net id (from user). Combinations of reliable/ordered would FAIL if used within the same channel Id. This issue would normally only happen with higher player counts – but it is definitely an issue.
- Limitation – no way to send a message to a subset of players (e.g. your team in a competitive game). V1 only allowed for sending to all, or to a single specified user
- Limitation – no protocol version embedded in the protocol – which makes it near impossible to modify/extend/correct the protocol and maintain compatibility with older clients.
- Unoptimized – the Docker container used to launch the relay servers wasn’t properly optimized to improve launch times.
The good news is that we have addressed these limitations with Version 2 of our RelayComms Protocol – and incorporated it into our new Relay Servers and 4.5.6 Client Libraries.
The better news is that the Client APIs for the new RelayComms is almost completely compatible – that is, you don’t need to change your client code to use the new servers – other than:
- In C#-only, you need to adjust for the new
netIdparameter in the
RelayCallback()method ← note, this was a defect. The other languages already had that parameter in their callback method.
- If migrating a Live application, you will need to substitute in the new lobby ids (see the migration procedure section below)
The bad news is that our new V2 Relay Servers are not compatible with our 4.5.5 and older client libraries – so they only work with brainCloud 4.5.6 libs and greater. Conversely – the new 4.5.6 libs do not work with the legacy Relay Servers – so migrating your apps to the new Relay Servers (which we highly recommend) must be done carefully. We provide the details on how to do this without interruption in a section below.
Note – The V1 RelayServers will continue to function for the foreseeable future (at least 1 year) – so you do not need to force a short-term upgrade to your app. It is highly recommended that apps upgrade when they get a chance however.
This release also includes some serious optimizations to brainCloud’s Online Matchmaking and Lobby System algorithms – resulting in:
- greater lobby queue scalability
- much faster best-case room/relay server launches
Note that these changes are completely under-the-hood – no API changes required.
The following changes are also included in this release:
- Amazon Platform detection – has been added to all of the libs (except C++). Important – be sure to turn on the “Amazon” platform on the Design | Core App Info | Platforms page for your app. This is important even if you aren’t using Amazon IAP – otherwise, your Android app won’t launch on Amazon devices!
- Ability to clone Lobby and Server types – has been added to facilitate easier migration to the new Relay Servers
- Improved WebPurify integration – are servers are now properly encoding problematic text characters before sending them to WebPurify
Procedure: Relay Server Migration
The following approach is recommended for migrating your app from V1 Relay Servers → V2 Relay Servers.
This approach has been designed to:
- ensure the app is available to all players throughout the migration
- support the various app store review processes
- keep the developer in control of the timelines of the migration.
Benefits: This approach allows users of your old client to continue to play using the V1 Relay Servers – even as your updated client goes through app store reviews, soft launch, etc. using the new V2 Relay Servers. And then, after your release has been deployed globally and across all platforms, you can “force” users to upgrade to unite all players together again.
The executive summary of the recommended approach is:
- Clone the Lobby and Server definitions of your app – producing a new set of V2 Lobbies and V2 Servers that will be used by the updated versionof your app
- Configure the V2 Server definitions to use Relay Protocol v2
- Configure the V2 Lobby definitions to use the new V2 Server definitions
- Modify your Client App to use the new V2 Lobby definitions, as well as the appropriate 4.5.6 Client Library
- Optionally (but recommended), ensure that your Client App reacts to the Minimum Version setting from the Design | Core App Info | Platform page. This will allow you to “force” your users to upgrade to the new client when you are ready (see Version Enforcement)
This section describes step-by-step how to modify your app to implement the recommended migration approach.
- Go to Design | Cloud Code | My Servers – and clone the Relay Server entries to create new “V2” versions. A new [Clone Server] button has been added to assist with this. After cloning each entry, be sure to Edit it, and change the Relay Protocol to v2!
- Go to Design | Multiplayer | Lobbies – and clone the Lobby entries to create new “V2” versions. A new Clone option has been added to the Action menu to assist with this. After cloning each entry, be sure to Edit it, and change it to refer to one of the V2 Servers that you created in Step 1.
- Replace your brainCloud library with a new 4.5.6+ version of the client library.
- Go into your source code, and change the names of the Lobbies that your client app references to the new V2 version of the lobby type name.
- Rebuild and test your client app to ensure everything works.
- (Optional – but highly recommended) If you haven’t already, enhance your app to pass the app version during the BrainCloudWrapper.Initialize() method, and display a “Client update required” dialog if it receives a 40322 – APP_VERSION_NOT_SUPPORTED error from the server during authentication. This will allow you to force users to upgrade to the new client when you are ready. Note – the required app versions are controlled via the Design | Core App Info | Platforms page.
For more information on implementing Version Enforcement in brainCloud, see the article at the link.
App Submission & Migration
- Submit the updated app (which uses the V2 Relay Servers) to the various app stores for approval. Existing users will continue to play using the V1 Relay Servers.
- Officially Release your app. During this stage of launch, your player liquidity is split – between the older and newer servers.
- (Optional – but highly recommended) Once you are ready (and are confident that the app updated has been distributed globally to all appstores), you can update the minimum required versions on the Design | Core App Info | Platforms page to force users to upgrade, and re-unite your player base!
And voila – you have successfully migrated your app to the V2 Relay Servers without interruption!
We have made the following portal changes:
- Cloud Code | My Servers
- Added new [Clone Server] button to make it easier to duplicate server configurations
- Messaging | Chat
- The Replace Profanity with setting now properly defaults to “*”
- Multiplayer | Lobbies
- Added a Clone option to the Action menu to make it easier to duplicate lobby configurations
Reminder – The 4.5.6 client libs only work with the V2 Relay Servers.
If your app is live and using Relay Servers, do not upgrade to the 4.5.6 Client Libraries until you are ready to migrate your app according to the procedure described in these release notes.
Although the Client libraries have changed significantly to support RelayComms V2, the APIs themselves have not.
There is just one fix to the C# libraries that affect a method signature:
RelayCallback()method signature has changed. It now includes a
public delegate void RelayCallback(short netId, byte data);
Miscellaneous Changes / Fixes
- Updated libraries
- All libs have been updated to use RelayComms V2!
- All libs (except C#) now include Amazon Platform detection. Important: If your app supports Android, and you want your Android apps to run on Amazon devices, remember to enable the Amazon platform on the Design | Core App Info | Platforms page!
- Documentation updates
- The API Reference has been updated to include the updated C# RelayCallback
- Important Fixes
- BCLD-6304 – Error sending certain chat messages with WebPurify support enabled
- BCLD-6240 – Presence updates sometimes failing due to improper TTL setting
- BCLD-6239 – Lobby matchmaking NPE
- Plus miscellaneous fixes and performance enhancements…